Hold CTRL and press "+" or "-" to increase or decrease page size
Harmony H1201 Tenor V-braced Restoration (#181) - SOLD
Original cardboard case included.
No date stamp.
Action is less than 1/16 inch.
Sound is exceptional.
We pay attention to fine details. The inside back and sides are cleaned up and sanded smooth.
We chip out all of the glue globs. Braces are tapered and sanded smooth.
Back braces are rounded and sanded smooth. The back is sanded smooth.(Remember, sound waves
don’t like rough surfaces.) We use a drill press and reamer to install new
solid metal bushings and modern tuners. We do what Harmony should have done 50 years ago.
New Parts
- Top - New AAA Sitka Spruce
- Fret board - New 14 radius genuine ebony.
- Bridge - Shop made ebony- same size and profile as original attached with hot hide glue. Intonation is perfect
- Braces - 100 degree forward shifted quarter sawn premium Sitka spruce
- Frets - All new medium profile
- Tuners - Stewmac 2516 with correctly fitted solid metal bushings
- Pins - Ivoroid (4965) - Jewelry for your guitar!
- End pin - Ivoroid (4965-EP) to match the bridge pin set.
- Saddle - Vintage bone compensated
- Nut - Vintage bone
- Dot markers - Graduated diameter mother of Pearl
- Gear head face replaced with Indian Rosewood veneer. (The original was sanded off or removed before we received.)
OEM Parts
- Neck - Solid mahogany, one piece
- Back and sides - Solid mahogany
- Top - Solid Sitka spruce - no cracks
- Pick guard - None.
Condition
No significant issues. Nice original condition finish on back and sides. Minimal finish issues - some scratches on one side near the top.
Warranty Statement
Shipping Details
MOONLIGHTLUTHIERS - Have Pick Will Travel